產品特點
產品演示
功能演示
我們的優勢
Yoswit Smart Switch
- 55 / 86 / 118 / 120
- Bluetooth
Schneider
(ULTI Ezinstall3)
- 55 / 86
- RF
Legrand
(Arteor/Adorne/Radiant)
- 單層
- 55 / 86 / 120
- Zigbee / RF
Leviton
(Decora)
LUTRON
(Caseta)
藍牙版本
我們使用藍牙4.2（亦可叫作藍牙低功耗或BLE）作為我們產品的核心模組。
兼容設備
我們兼容所有支援藍牙Smart Ready技術的智能設備，包括手機，平板電腦及智能機頂盒。
iOS支援
我們支持iOS 7.0或更高版本。另外，我們有為iPhone和iPad分別提供不同分辨率的應用程式。
Android支援
我們支持Android 4.3或更高版本。這是2013年8月剛剛發布的第一款支持藍牙智能技術的Android版本。
| 一般規格 | |
| 產品名稱 | Yoswit 捲軸摩打 |
| 型號 | YO1008S |
| 生產廠商 | 由Yoswit在香港生產，中國內地組裝 |
| 摩打規格 | |
| 額定轉矩 (N.m.) | 6 (230V) / 6 (120V) |
| 管內直徑 (毫米) | 35 (230V) / 35 (120V) |
| 額定功率 (w) | 121 (230V) / 102 (120V) |
| 額定電流 (A) | 0.53 (230V) / 0.85 (120V) |
| 運行時間 (分鐘) | 4 (230V) / 4 (120V) |
| 國際防護等級認證 (IP) | 44 (230V) / 44 (120V) |
| 額定轉速 (rpm) | 28 (230V) / 33 (120V) |
| 額定頻率 (Hz) | 50 (230V) / 60 (120V) |
| 產品認證 | TÜV, GS, CCC, CE, RoHS (230V) / UL, RoHS (120V) |
| 機械規格 | |
| 外觀材料 | V0 阻燃 PC+ABS |
| 儲存條件 | -20°C 至 70°C |
| 操作環境 | 室內 |
| 溫度範圍 | -10°C 至 50°C |
| 濕度範圍 | 0-90% 相對濕度（無冷凝） |
| 電子規格 | |
| 輸入電壓 | AC100-240V |
| 頻率 | 50/60Hz 自動檢測 |
| 阻性負載 | 上限 20A |
| 待機功率 | <0.3 watt |
| 接駁方法 | 電路圖的詳細資料，請參考安裝頁面 |
| 藍牙規格 | |
| 產品兼容性 | Bluetooth Smart Ready 產品 |
| 頻率 | 2.4GHz |
| 無線傳輸功率 | 0~4 dBm |
| 藍牙有效範圍 | 空曠區域: > 50米 |
| 藍牙版本 | 藍牙4.2 |
WARNING !
Disconnect Power
To prevent severe shock or electrocution, always disconnect the power at the service panel before installation. Only licensed electricians should carry out the installation.
Basic Installation
1
Insert one end of your blinds into the gap of the roller tube. You may attach a cardboard stick to the blinds to make the insertion easy. Carefully fit the blinds into the roller tube. Fit the crown and roller motor into both ends of the roller tube.
2
Insert the motorized roller into the recess of roller holder with pins to fasten the roller in a fixed position. Each side requires one pin.
3
Search for a proper position to install the roller. Mount one wall mount on a flat surface with screws.
Reminder
Position the wall mount so that the motorized roller hangs straight. Always install the roller horizontally on a flat surface, i.e. wall or ceiling.
4
Fit another wall mount into the other end of the flat surface with screws.
Reminder
In order to insert the assembled roller smoothly, measure a proper distance between two wall mounts. In addition, to ensure the fabric rolls down evenly, both brackets must be level.
The bearing capacity of the sum of screws must be at least 300kg.
Warning
The bearing capacity of the sum of screws must be at least 300kg.
5
Mount the assembled roller to the assembled wall mount.
6
Disconnect the power supply of your switch. If you are installing Yoswit roller switch, please refer to the user manual of Yoswit curtain/roller switch.
Warning
To prevent severe shock orelectrocution, always disconnect the power at the service panel before installation. Only licensed electricians should carry out the installation.
7
Connect the live, neutral and ground wires of motorized roller to your switch.
Warning
To reduce risk of electrical shock, unit shall be properly grounded in accordance with local regulations or codes. Failure to connect the ground wire will result in an unsafe installation that could lead to personal injury.
Circuit Installation A
Circuit Installation B
8
Turn on the circuit breaker and connect to the power.
9
Test the motorized roller by tapping your switch for several times.
Adjusting the Upper or Lower Limit
1
Keep pressing the switch to pull open/shut the roller.
2
Use the special limit regulator to adjust the “+” rotation by:
Installation complete.
Download the Yoswit App to your smart device and enjoy it now!
Yoswit will automatically detect the switch and add to your device list.
智能燈掣專家
